|
The Simplex Trident 1250R Trailer load bank is ideal for field testing in the performance of start-up and commissioning activities, service contracts and engine generator maintenance. Rentals are available in 1250kw capacities. Operator interface is via touchscreen. Multiple Tridents may be networked together to yield total capacities of tens or hundreds of megawatts. Simplex trailers are built to DOT specification, NTM DOT certification label.
|
General
Digital Control
• | PLC based control with 8-inch color TFT touchscreen interface. MODBUS over RS-485 network communication. |
• | Nominal 5.0 kw resolution: direct enter any load value and controller will apply load within nominal 5kw resolution. |
• | Controller automatically calibrates loads for reduced voltage operation. |
Instrumentation
• | Digital power transducer with Ethernet communication to digital controller. Data display on touchscreen. Data acquisition and recording. |
Load Elements
• | Simplex "Powr-Web" chromium alloy, open wire, continuously supported, power resistor. |
Load Control
Load Element Circuit Protection
• | Branch circuit fuses. One set of fuses each 50KW branch. Fuses are current limiting type, 200KAIC, 600V. |
Cooling System
• | 3-phase, direct-drive fan, 21,000 CFM. |
Malfunction Detection System
• | Protection against fan failure, high exhaust air temperature, high intake air temperature, overvoltage and fan reversal. Exhaust air temperature displays on screen. |
Control Power Supply
• | Dual voltage control power transformer with supply power switchable to internal (generator) or external. |
Touch Screen
• | Easily removable from panel. |
Connection
• | Cam-Lock style cable connectors behind hinged door. 4/0, 400A. Snap-back protective covers. Also available orange-brown-yellow. |
Cable Storage
• | Capacity: 900-feet x 4/0 (1" cable), perfect wrap; 750-feet x 4/0 (1" cable), nominal wrap. |
• | Standard Reel Features: Manual, gear driven, crank rewind; Pinion brake; 2" steel channel frame, powder coated. |
Trailer
• | Construction: Structural steel chassis, steel deck, all welded, built to DOT specification, NTM DOT certification label. |
• | Axles: Tandem. |
• | Hitch: 2-5/16" ball hitch or 3" pintle ring. |
• | Brakes: Electric with breakaway system or hydraulic surge, mechanical parking brake. |
• | Suspension: Leaf springs. |
• | Features: Safety chains, DOT LED lighting with connector, reflectors, tie down rings, rear stabilizers, front lift jack, mud deflectors. |
• | Standard Finish: Dark gray polyurethane with epoxy primer. |
• | Optional Finishes: Customer selected color. Undercoating. LINE-X overall protective coating. Hot dip galvanizing. |
Load Type |
Resistive |
Capacity |
600KW, 750KW, 800KW, 900KW, 1000KW, 1250KW |
Power Factor |
1.0 |
Voltages |
Dual Voltage: 240/480V AC, 3-phase Operational at any voltage to 480V AC maximum, single or 3-phase |
Frequency |
50, 60 Hz |
Digital Control |
PLC based control with 8-inch color TFT touchscreen interface. Nominal 5.0 kw resolution: direct enter any load value and controller will apply load within nominal 5kw resolution. |
Load Connection |
3-wire plus ground; “Cam-Lock” type power connections
|
Cooling Airflow |
Horizontal, 21,000 CFM |
Fan/Control Power |
230/460V, 3-phase, 60 Hertz
190/380V, 3-phase, 50 Hertz
Switchable internal (generator)-external
External fan/control power; requirements: 240/480vAC, 3-phase, 60 Hertz, 40 / 20 amps service (7.5HP motor)
230/460-115V control power transformer internal to Load Bank supply |
Duty Cycle |
Continuous |
Portability |
Trailer |
Networkable |
Yes |
Outdoor Suitable |
Yes |
|